HYUNDAI WELDING

Business Introduction

ALL PRODUCT

Flux & Wire Combination

S-777MX x H-14

S-777MX S-777MX x H-14

Type
Industry
JIS Z3352 S A AR 1 / Z3351 YS-S6 / Z3183 S502-H
EN ISO 14174 S A AR 1 / 14171 S4
KS
AWS A5.17/ASME SFA5.17 F7A0-EH14 (S-777MX/H-14)
  • Caution ① Dry at 300~350℃(572~662℉) for 60 minutes before use.
    ② In case of multi-layer welding of the thick plate, to prevent cracks, low current and low speed welding should be performed on the lower layer.
    ③ If weld heat input is managed below 30KJ/cm, a better impact toughness can be achieved.
    ④ When restraint stress is high or welding a thick plate, preheat according to rules.
  • Purpose ① LPG tanks
    ② Spiral Pipes
    ③ Agricultural implements
  • Attribute ① Easy to remove slag
    ② High speed welding
    ③ Horizontal and flat fillet welding
    ④ Density : 1.0g/cm3
top